Catalina 445 zu Verkaufen

Remarks :
**REDUCED – Rare Opportunity to own a quality Catalina in Europe**
XCAPE is hull #3, carefully equipped for long distance cruising by her experienced owner since new with no expense spared on maintenance or upgrades. Built to handle blue water, she has sailed the Caribbean, Atlantic and Mediterranean.
Catalina sailboats are manufactured out of Largo, FL, factory. It was founded in 1969 in Hollywood, California by Frank Butler .Catalina Yachts is one of the largest boat manufacturers in the world, with over 80,000 boats manufactured to date.
The spacious cockpit has as a full enclosure bimini (2022), mounted solar. A performance hull design that sails well up wind, with the luxury of electric winches, perfect when short handed sailing.
The 54HP Yanmar 4JH4 AE engine has 506 hours since a complete overhaul Oct 2021. 250 litre plus 68 litre fuel tanks provide a range of 700 nm at 3 litres p/hour
Reversible Air-conditioning/Heating.
Watermaker.
Northern Lights Generator fitted 2017 (only 406 hours), for electrical supply or via the on board Inverter.
Sails are serviceable and all lines controlled from the cockpit with electric winches:
DOYLE Main sail in-mast furling – 2012
DOYLE Furling Genoa – 2014
Gennaker DOYLE with Sock – 2011
Carib C10x Tender/Annex
2009 – 15hp Yamaha Outboard
Check the Youtube review below for Hull #1
Contact NYBAntibes for an early visit and full equipment list.

Accommodation :
Xcape has a large forward double Stateroom
Starboard Aft double cabin
Convertible large double in Main Salon
Convertible Single Starboard side
Port Aft cabin has been converted as a workspace with one single berth

Inventory :
A Full inventory with many spares (To be completed)

Carib C10x Tender/Annex
2009 – 15hp Yamaha Outboard

General note on safety equipment: Any safety equipment such as liferaft, fire extinguishers and flares etc., are usually personal to the current owner(s) and if being left on board as part of the sale of a used vessel, may require routine servicing, replacement, or changing to meet a new owner’s specific needs.

Mechanical :
Yanmar engine full overhaul Oct 2021.
Engine hours since overhaul 506 hours.
2017 Northern Lights 4.5kw Generator – 406hrs

Sails in good and servicable condition
DOYLE MAIN – 2012
FURLING GENOA – 2014
GENNAKER IN SOCK – 2011

Sail Area
Total with 100% Foretriangle 856ft2 (79.52m2)
Total with Standard 135% Genoa 1155ft2 (107.30m2)

I : 53.6 ft (16.26m)
J : 15.8 ft (16.26m)
P : 51.6 ft (4.76m)
E : 17.00 ft (5.17m)
Keel Details
Keel Type: Wing
Ballast: 8300 lbs (3759 kg)
Displacement: 24900 lbs (11279 kg)
Max Draft: 4.10 ft (1.47m)
Engine and Controls
Yanmar 4 JH4-AE 54HP Diesel – Overhauled Oct 2021
Twin Pedestal Steering with 32“ (81.28) stainless wheel
Single lever engine controls
3 Blade 17×15 (43.18 cm x 38.10 cm) – Flexfold
Rope Cutter – Delot