The Oceanis Yacht 62 (2018) is a luxury sailing yacht designed for long-distance cruising or life on board, offering:

Spacious interior and exterior spaces with refined finishes.

Efficient and comfortable navigation.

List of navigation equipment and electronics with brand and model

B&G Zeus 2 and 3

Radar, AIS, Autopilot with remote control.

List of generators, chargers,

water treatment plant with make and model

Cummings Onan 17.5 KW

Chargers Dolphin

Water purifier Dessalator Duo 100 litres per hour with membranes

originals and 864 hours of use.

Sail equipment, condition and age

Original factory Major and Genoa „Incidence“ (2018) in good condition.

The largest is traditional with 3 curls.

The Genoa may need minor repairs to the luff.

Code 0, Neil Pryde

Number of manual and electric winches

4 electric winches

All relevant information and maintenance

Engine maintenance up to date, carried out every 250 hours for the engine.

Maintenance of the generator is up to date, carried out every 200 hours.

Further information

Construction

Designed in accordance with the requirements of the European Directive and CE certification. Composition: Polyester resin

• Infused balsa sandwich hull

• Solid infusion-moulded helmet base

• Balsa and fibreglass sandwich deck covered with a non-slip „diamond point“ surface

• Hull-to-deck joint made of polyester, bolted, glued and bolted

• Cast iron keel secured with stainless steel bolts and backing plates

• Double hanging rudder with stainless steel shaft

• White helmet

Deck accessories

All sail trimming on the Oceanis 62 is done from the helm stations.

Teak with black caulking

Shoring

• Traditional 9/10 anodised aluminium mast with conical shape – deck-mounted – 3 sets of

spears leaning backwards, bow light

• Foldable mast steps

• Anodised aluminium boom

• Stainless steel shoring

• Split rear stay for bracing (hydraulic option)

• Rigid vang (hydraulic option)

• Genoa furler (electric option) – drum on deck

• 2 standing pulleys for the highest fixed compound bow

• 2 genoa tracks with piston-adjusted traveller cars – 2 genoa swivel blocks

• Complete shoring:

– 2:1 Dyneema purchase for the mainsail halyard

– Dyneema genoa halyard on tension rail

– Boom lift

– Mainsail halyard

– 2 genoa halyards (2 single-point reefing – 1 double-point reefing)

• 9 Jammers (2 as an option for the jib halyard and spinnaker halyard)

• 2 bags for string tails

• Preparation for the spinnaker rigging (asymmetric spinnaker – Code 0)

Cockpit

• Self-draining cockpit with solid natural wood deck

• Raft storage in the compartment in the cockpit floor

• 2 compartments in the back of the cockpit seats, opening with gas struts

• 1 compartment next to the portside steering console

• 1 gas compartment next to the starboard helm console

• 2 solid natural wood cockpit benches with slats

• 2 helm stations:

– Stainless steel steering wheels, 1100 mm / 3’7’’ diameter

– Leather covers

– Address blocking

– Cable transmission system

– Compartment for rope tails

– Coasters

• Cover plates for rudder system – Emergency steering

• Engine throttle and control panel on starboard side

• 2 solid wood cockpit tables with fixed legs (option to convert into sun loungers):

– 2 sheets

– Pasamanos

– Coasters beneath the leaves

• LED lighting under the arch and LED lights in the cockpit, transom and front sun lounger

• PMMA access doors and sliding access hatch

Cockpit de popa

• Large storage compartment under the rear centre seat (optional external kitchen module) – Gas strut opening

• 2 liftable helm seats for access to the steps of the bathing platform

• Earthed power socket

Transom the popa

• Access to the sea from the fully open electric transom with gas shock absorber, converting into a bathing platform

• 1 step behind each helm station

• Access to the dinghy garage

• Solid wood bathing platform

• 1 built-in stainless steel bath ladder

• 1 cockpit shower with hot and cold water

Dinghy garage

• 1 access hatch in the cockpit floor between the 2 helm stations for access without opening the aft platform

• Dinghy garage: 3.49 x 1.70 m / 11’5’’ x 5’7’’

• 3 lights

• Canvas cover to close the dinghy compartment and textile storage bags

Interior

Alpi Moabi satin wood carpentry

Milano oak laminate flooring

Commando natural upholstery with Météor grey piping

Ceiling, hull and bulkheads covered with grey and beige Météor fabric lining

Luces LED

Hatch

• Clear height: 2.08 m / 6’10’’

• Wooden hatch with 6 moulded wooden steps

• Stainless steel hatch handrails covered in Météor grey leather

Port side lounge

• Clear height: 2.06 m / 6’9’’

• L-shaped bench with armrests

• Central sofa with armrests

• Central unit with built-in bar

• Wooden coffee table (varnished top, 2 fixed aluminium legs)

• Storage compartment open along the hull – Storage space under the seats and sofa

• 1 panoramic skylight with blackout blinds/mosquito nets at the front

• 3 large portholes in the hull with opaque shutters

• 1 fixed side window on the roof with pleated blind

• 1 opening port on the side window

• Grey Météor mast cover, built-in shelf, LED strip

• 3 LED reading lights

• 11 LED ceiling lights

• 1 strip of LED lights under the upper cabinets

• 1 x 230 V socket

Chart table (port side)

• Hinged lid – versatile cupboard – storage – Moulded wooden handrail with Météor leather

stainless steel clad

• Swivel passenger seat

• Electrical panel with all functions on board, backlit

• Navigation instrument panel (optional instruments)

• 1 deck window

• 2 USB charging ports

• 1 LED reading light

• 3 LED ceiling lights

• 1 x 230 V socket

Kitchen

• Clear height: 2.06 m / 6’9’’

• 2 stainless steel handrails covered in Météor leather

• Oven/grill/stove with 3 burners in Luxe stainless steel assembly (retractable lid and front)

• Cupboard and drawers for pans and lids

• Compartmentalised containers

• Refrigerator with cooling unit (1 x 300 L – 2 openings from the top, 1 front door)

• Lacquered upper units

• Corian Deep Mink worktop with built-in railings

• Large rectangular stainless steel sink with hot/cold mixer tap (2 Corian covers)

• 3 portholes in the hull with opaque shutters

• 1 fixed side window on the roof with blind

• 5 LED ceiling lights

• 1 LED strip light under the top cupboards

• 2 x 2 sockets 230V

Technical cabinet

• Near the entrance to the starboard aft cabin

• Access to all circuit breakers and electrical panel + generator room

• 3 LED ceiling lights

Starboard area at the bottom of the hatch